매달, 우리는 1000명 이상의 사람들이 시험 준비를 잘하고 시험을 잘 통과할 수 있도록 도와줍니다.
LEED AP Interior Design + Construction (LEED AP ID+C) V4 온라인 연습
최종 업데이트 시간: 2025년06월06일
당신은 온라인 연습 문제를 통해 USGBC LEED AP ID+C 시험지식에 대해 자신이 어떻게 알고 있는지 파악한 후 시험 참가 신청 여부를 결정할 수 있다.
시험을 100% 합격하고 시험 준비 시간을 35% 절약하기를 바라며 LEED AP ID+C 덤프 (최신 실제 시험 문제)를 사용 선택하여 현재 최신 100개의 시험 문제와 답을 포함하십시오.
정답:
Explanation:
The discovery phase of the Integrative Process Credit involves a comprehensive analysis of various aspects of site selection for an existing building. This phase is crucial for identifying opportunities and challenges that can influence the project’s sustainability goals. Among the options provided, transportation options are a key factor that can be affected by early planning. Identifying transportation options helps in understanding the accessibility of the site and its impact on the project’s sustainability, particularly in terms of reducing the carbon footprint associated with commuting1.
Reference: LEED v4: Interior Design + Construction Guide1.
Understanding Integrative Design in LEEDv42.
정답:
Explanation:
Exemplary performance in LEED is typically achieved by significantly exceeding the requirements for a credit. In the case of water savings, exemplary performance can be achieved by demonstrating a level of water savings that is substantially higher than the standard requirement. A 55% potable water savings would represent a significant reduction in water use and could qualify for an exemplary performance credit under the LEED v4 ID+C rating system.
Reference: LEED v4 ID+C Reference Guide1
LEED v4 water efficiency exemplary performance thresholds2.
정답:
Explanation:
A LEED project located within a LEED for Neighborhood Development (LEED-ND) certified boundary is eligible for points under the Location and Transportation Credit, LEED for Neighborhood Development Location. If the development is certified at the Silver level, the project automatically earns 10 points. In addition to these points, the project can earn up to 8 more points in the Location and Transportation category for implementing strategies such as reducing parking footprint, promoting alternative transportation, and connecting with amenities1.
Reference: LEED v4.1 Reference Guide for Building Design and Construction, which includes details on the Location and Transportation category1.
LEED v4.1 credit library, which outlines the potential points available under various credits within the Location and Transportation category2.
정답:
Explanation:
Integrated decision-making involves the collaborative effort of various stakeholders in a project, from its conception through completion, to ensure the building's design serves its intended purpose effectively. In the context of placing circulation near the office perimeter next to the window wall, integrated decision-making would mean making design choices that enhance the building's performance and occupant comfort. Option A, installing blinds to increase occupant comfort, would address issues such as glare and thermal gains from the sun, which directly impact the occupants' comfort and the building's heating and cooling loads. This decision would emerge from the iterative process of identifying the unique needs and challenges of the project and making early design decisions that benefit the project both in execution and operation.
Reference: Insights into the integrative process and the importance of collaborative decision-making in LEED projects, emphasizing the impact of early design decisions on building performance and stakeholder value
정답:
Explanation:
The Water Efficiency Prerequisite for Indoor Water Use Reduction in LEED AP ID+C V4 focuses on reducing the aggregate indoor water consumption by 20 percent from the baseline. This includes water usage by appliances such as residential clothes washers and dishwashers, which are common contributors to indoor water use.
Reference: The LEED v4 Indoor Water Use Reduction Calculator provides guidance on the baseline water consumption for various fittings and fixtures, including residential appliances1. Additionally, the LEED v4: Interior Design + Construction Guide outlines the requirements for achieving the prerequisite, emphasizing the reduction of indoor water use through efficient appliances2.
In the Water Efficiency Prerequisite for Indoor Water Use Reduction, the focus is on reducing potable
water usage through efficient fixtures and appliances. The eligible appliances that fall under this prerequisite are residential clothes washers and dishwashers, as they are commonly used appliances within buildings and contribute to indoor water use. These appliances must meet certain efficiency standards, such as being ENERGY STAR certified or equivalent, which ensure they use less water than conventional models.
Reference: Specification of appliances under the Water Efficiency Prerequisite for Indoor Water Use Reduction, which includes standards and requirements for residential clothes washers and dishwashers, among other appliances.
정답:
Explanation:
The Commissioning (Cx) agent for Energy and Atmosphere Credit, Enhanced Commissioning, must be independent of the project’s design and construction management to avoid conflicts of interest. This ensures that the Cx agent can objectively assess the project’s performance and adherence to design intentions.
Reference: The LEED v4 reference guide for Interior Design and Construction specifies that the Cx agent should not be an employee of the design firm to maintain independence1. Additionally, the LEED AP with Specialty Candidate Handbook outlines the importance of the Cx agent’s independence in the commissioning process2.
정답:
Explanation:
Advanced Energy Metering is the credit that works synergistically with the Energy and Atmosphere Credit, Enhanced Commissioning. This is because Advanced Energy Metering involves the implementation of submetering systems that provide data on the building’s energy use. This data is crucial for the ongoing commissioning process to ensure that the building’s systems are operating as intended over time. The data helps in identifying opportunities for energy savings and ensures that energy conservation measures continue to perform optimally12.
Reference: LEED v4 for Building Design and Construction Guide3.
LEED Credit Library - Energy and Atmosphere4.
Advanced Energy Metering Credit Information1.
정답:
Explanation:
To document the non-structural elements that will be reused in a LEED AP Interior Design and Construction project, it is necessary to have drawings that indicate the elements to be reused. These drawings provide a visual representation of what is being kept from the existing space. Additionally, a tracking spreadsheet is essential for documenting the details of these elements, including their condition, location, and any other relevant information that supports the reuse strategy.
Reference: The information aligns with the LEED v4.1 requirements for Interiors Life-Cycle Impact Reduction, where documentation of reused non-structural elements is part of the credit achievement process1.
정답:
Explanation:
The Integrative Process Credit encourages early planning and integration of various building systems to enhance project performance and environmental benefits. By focusing on early energy- and water-related research and analysis, this credit can influence several aspects of building design, including the Indoor Environmental Quality Credit, Indoor Air Quality Assessment. This is because early planning can help identify strategies for improving indoor air quality, such as material selection and HVAC design, which are integral to achieving this credit1.
Reference: LEED v4: Interior Design + Construction Guide1.
Understanding Integrative Design in LEEDv42.
The Integrative Process Credit promotes an early planning phase where the project team collaborates and uses cross-discipline knowledge to optimize the project's design and performance. Energy and water systems are often focal points during this phase. While the early planning process can influence various aspects of project design and execution, among the given options, the Indoor Environmental Quality Credit for Indoor Air Quality Assessment is most likely to be affected. This credit involves examining various strategies to improve indoor air quality, such as material selection, HVAC design, and contaminant control, which can be significantly enhanced through early integrated planning and consideration of interconnected systems.
Reference: Detailed insight into the Integrative Process within LEED, highlighting the importance of early planning and its impact on building performance, particularly in relation to energy and water systems which can affect indoor air quality measures.
정답:
Explanation:
For the Water Efficiency Credit, Indoor Water Use Reduction calculations, all fixtures within the LEED project boundary must be included, both new and existing. The baseline for the existing fixtures should be the same as the baseline flush/flow rates used for the new fixtures. This approach ensures a consistent and fair comparison between the current and proposed water use.
Reference: LEED v4 ID+C Reference Guide1
Indoor Water Use Reduction Calculator instructions2
LEED v4 water efficiency credit requirements3.
정답:
Explanation:
To achieve the Materials and Resources Credit for Building Product Disclosure and Optimization - Material Ingredients, a product can demonstrate material ingredient optimization through the GreenScreen v1.2 Benchmark. This method involves a screening process to assess the hazards of chemicals used in products and aims to reduce the use of chemicals that are harmful to human health and the environment1.
Reference: LEED v4.1 reference guide for Interior Design and Construction, specifically the section on Building Product Disclosure and Optimization - Material Ingredients2.
“ULTIMATE GUIDE TO LEED V4 & V4.1 MRc4 Option 2” by Green Badger, which details the requirements and strategies for achieving Material Ingredient Optimization in LEED v4.11.
정답:
Explanation:
Innovation Credit, Innovation, Option 3: Additional Strategies allows for the pursuit of exemplary performance in an existing LEED v4 prerequisite or credit that allows for such performance. In this case, achieving exemplary performance in the Indoor Environmental Quality Credit for Acoustic Performance can provide the additional point needed for LEED Platinum certification. This would involve surpassing the standard requirements for acoustic performance, thereby contributing to a superior indoor environment1.
Reference: LEED v4 Reference Guide for Interior Design and Construction2.
LEED credit library for Innovation strategies3.
LEEDuser’s guide on NC-v4.1 INc1: Innovation1.
정답:
Explanation:
The LEED v4 criteria for the Energy and Atmosphere Credit, Advanced Energy Metering, Option 2 requires advanced energy metering for all whole-building energy sources as well as for any individual energy end uses that account for 10% or more of the total annual consumption of the building. From the provided energy end-use consumption data, it is clear that space cooling, interior fans, and receptacles each represent more than 10% of the total energy consumption. Additionally, interior lighting and space heating together also account for a significant portion of the energy consumption. Hence, to meet the credit requirements, advanced metering must be installed for all these categories, aligning with option C.
Reference: Guidance from the LEED study guide explaining the requirements for advanced energy metering under the Energy and Atmosphere Credit, particularly for end uses that comprise 10% or more of total consumption.
정답:
Explanation:
For the LEED Location and Transportation Credit for Bicycle Facilities, providing at least one on-site shower and changing facility for employees is a minimum requirement to earn the credit. This is to encourage cycling as a mode of transportation by offering amenities that support cyclists1.
Reference: LEED v4 for Interior Design and Construction (ID+C): Reference Guide2.
LEED Credit Library: Bicycle Facilities1.
LEED Certification- Requirements for LT Credit: Bicycle Facilities3.
정답:
Explanation:
In the context of LEED AP ID+C V4, for the Building Product Disclosure and Optimization - Sourcing of Raw Materials, Option 2: Leadership Extraction Practices, the contribution is calculated based on the cost of the product and the percentage of certification. The furniture option, despite having a lower percentage of certification, has the highest total cost, which results in the largest contribution by cost to the credit.
Reference: This approach is consistent with the LEED v4 guidelines for Interior Design and Construction, which prioritize the economic value of materials when calculating contributions to credits1. The Rainforest Alliance Certification is recognized as a leadership extraction practice, and the contribution is calculated based on the total cost of the product and the percentage of the product that is certified1.