UIPATH-ADPV1 시험 - UiPath실제시험문제와 답 - 60문항

Question No : 1

Which part of a test case that is using BDD (Behavioral-Driven Development) template structure supports the Surround with mock feature?

A.Then
B.Setup
C.When
D.Given

정답:
Explanation:
In the BDD (Behavioral-Driven Development) template structure, the "Setup" part of a test case supports the Surround with mock feature. This section is used to set up the testing environment, including mock configurations.

Question No : 2

"Process A" is scheduled to run at 2:00 PM using a time trigger with the Schedule ending of Job execution feature configured to stop the job after 20 minutes.
Assuming that the robots are busy and "Process A" is queued until 2:05 PM. at what time will "Process A* be stopped?

A.2:20 PM
B.2:25 PM
C.2:05 PM
D.2:28 PM

정답:
Explanation:
"Process A":
The process is scheduled to run at 2:00 PM, but due to busy robots, it starts at 2:05 PM.
The Schedule ending of Job execution feature is configured to stop the job after 20 minutes.
Therefore, "Process A" will be stopped 20 minutes after it started, which is at 2:25 PM.

Question No : 3

A developer Intends to incorporate a Flow Switch activity within a Flowchart.
What Is a characteristic of this activity?

A.The Flow Switch activity is designed solely for usage in sequence workflows.
B.Two default cases can be assigned in the Default section
C.The default Type Argument property for the Flow Switch activity is set lo Int32.
D.Default cases can be numbered.

정답:
Explanation:
In UiPath, the Flow Switch activity is commonly used within flowcharts. Its default TypeArgument property is set to Int32, which means it is primarily used to handle integer-based decision branching.

Question No : 4

In UlPath Studio, when a developer executes a workflow in Debug mode and the process stops at a breakpoint, which panel enables the developer to assign values lo variables prior to resuming the process?

A.Locals Panel and Watch Panel.
B.Immediate Panel and Watch Panel.
C.Watch Panel and Breakpoint Panel.
D.Locals Panel and Immediate Panel

정답:
Explanation:
In UiPath Studio, during debugging when a workflow hits a breakpoint, the developer can assign values to variables using both the Locals Panel and the Immediate Panel. This feature allows for dynamic testing and troubleshooting.

Question No : 5

The "arrayOfPomtsGalnedByPanicipant" Object array is created and initialized with the following values: {"7", "4", "1"}.
Which is the value and data type returned, at runtime, by arrayOfPointsGainedByParticipant(1)?

A.Value: 4Data Type: Object
B.Value: 7 Data Type String
C.Value: 4Data Type: String
D.Value: 7Data Type: Object

정답:
Explanation:
Given the array "arrayOfPointsGainedByParticipant" with values {"7", "4", "1"}, at runtime, 'arrayOfPointsGainedByParticipant(1)' would return the value '4' with the data type 'String'. Arrays in .NET, which UiPath uses, are zero-indexed.

Question No : 6

When should a developer log a coherent message with the Logging Level set as "Info" while building an automation project?

A.Every time data is read from external sources.
B.Every time an exception is caught in a Catch block
C.Every time a variable or argument value is used.
D.Every time the robot encounters an error processing a Queue Item.

정답:
Explanation:
Logging a message with the "Info" level is appropriate every time data is read from external sources. This helps in tracking the flow of data and understanding the sequence of operations in the automation process.

Question No : 7

How are mock files organized in an automation project structure?

A.They are stored in a dedicated folder for mock testing configuration.
B.They are stored in a separate folder called "Mocks".
C.They are stored in the same folder as the source workflow.
D.They are stored in a nested structure based on the source workflow's file tree.

정답:
Explanation:
Mock files in an automation project structure are usually stored in a separate folder named "Mocks".
This organization helps in managing and accessing mock data efficiently during testing.

Question No : 8

A developer designed a process in the REFramework using Orchestrator queues.
In which state(s) will be the status updated for each Transaction Item in the queue?

A.Process Transaction only.
B.Get Transaction Data and Process Transaction.
C.Initialization and Process Transaction.
D.Initialization and Get Transaction Data.

정답:
Explanation:
In the REFramework using Orchestrator queues, the status of each Transaction Item in the queue is updated in two states: 'Get Transaction Data' and 'Process Transaction'. This ensures proper tracking and processing of each item.

Question No : 9

What does Application Exception describe?

A.An error rooted in a technical issue, such as an application that is not responding.
B.An error caused by using different data types than the expected ones in an application.
C.An error that occurs when the application is running on unstable environment.
D.An error rooted in the fact that certain data which the automation project depends on is incomplete or missing.

정답:
Explanation:
An Application Exception typically refers to errors arising from technical issues with applications, such as non-responsiveness or crashes. These exceptions are not related to the logic or data used by the application but are due to the application's functioning itself.

Question No : 10

What Is the role of server-side event triggers In UlPalh Integration Service?

A.To start UlPath processes only when users interact with specific Ul elements.
B.To manage API connections and authorize usage across different security protocols.
C.To notify users when a new connector is available In the UiPath Integration Service catalog.
D.To start UiPalh processes by configuring events such as data updates, insertions or deletions in other systems.

정답:
Explanation:
Server-side event triggers in UiPath Integration Service are used to automatically start UiPath processes in response to certain events, like data updates, insertions, or deletions in other systems. This allows for a high level of automation integration.

Question No : 11

Which one of the following expressions Is the equivalent of the If activity from the picture?

A.message = lf(number mod 2 = 0. "Even number", "Odd number")
B.message = lf(number mod 2 = 0. Odd number. Even number)
C.message = lf(number mod 2 = 0 then "Odd number" else "Even number")
D.message = lf(number mod 2 = 0 {"Odd number"} else {'Even number"})

정답:
Explanation:
This expression evaluates if the number modulo 2 equals 0, which would mean it is even. If true, it assigns the string "Even number" to the variable message. If false (meaning the number is odd), it assigns "Odd number" to message

Question No : 12

What are the two types of elements that can Be included in an Object Repository?

A.Local elements and library elements.
B.Dynamic elements and static elements
C.Web elements and mobile elements.
D.Ul elements and non-UI elements.

정답:
Explanation:
In the Object Repository in UiPath, there are two types of elements: Local elements and library elements. Local elements are specific to a project, while library elements can be reused across multiple projects.

Question No : 13

DRAG DROP
What is the correct execution order of the State activity sections?
instructions: Drag the Description found on the "Left" and drop on the correct Execution Order found on the "Right"

정답:

Question No : 14

How can UlPath Orchestrator help address potential Issues before they become critical problems?

A.By sending customer feedback to UiPath developers.
B.Through proactive monitoring and alerting of detected issues
C.With immediate technical support for any detected Issue.
D.By automatically updating background processes.

정답:
Explanation:
UiPath Orchestrator provides proactive monitoring and alerting features. These are designed to identify and notify about potential issues before they escalate into critical problems, enabling timely intervention and resolution.

Question No : 15

How can a process be converted from a toreground process to a background process?

A.A process may be turned into a Background Process by adding a "Background" tag to the process name as long as it does/does not contain Ul interaction. You need to go to the Project Settings and modify the name of the process.
B.A process may be turned into a Background Process as long as it does not contain persistence activities. You need to go to the Project Settings window and set the Supports Persistence toggle to No.
C.A process may be turned into a Background Process by just deleting the UiAutomation package dependency as long as it does/does not contain Ul interaction
D.A process may be turned into a Background Process as long as it does not contain activities with Ul interaction You need to go to the Project Settings window and set the Starts in Background toggle to Yes.

정답:
Explanation:
Converting a process into a background process in UiPath is accomplished by ensuring the process does not contain UI interaction and setting the "Starts in Background" toggle to Yes in the Project Settings. This is crucial for processes meant to run without user interface interaction.

UiPath UIPATH-ADPV1 시험