Administering Windows Server Hybrid Core Infrastructure 온라인 연습
최종 업데이트 시간: 2025년10월10일
당신은 온라인 연습 문제를 통해 Microsoft AZ-800 시험지식에 대해 자신이 어떻게 알고 있는지 파악한 후 시험 참가 신청 여부를 결정할 수 있다.
시험을 100% 합격하고 시험 준비 시간을 35% 절약하기를 바라며 AZ-800 덤프 (최신 실제 시험 문제)를 사용 선택하여 현재 최신 54개의 시험 문제와 답을 포함하십시오.
/ 15
Question No : 1
Your network contains an Active Directory Domain Services (AD DS) domain named contoso.com.
The domain contains two servers named Server1 and Server2.
Server1 contains a disk named Disk2. Disk2 contains a folder named UserData. UserData is shared to the Domain Users group. Disk2 is configured for deduplication. Server1 is protected by using Azure Backup.
Server1 fails.
You connect Disk2 to Server2.
You need to ensure that you can access all the files on Disk2 as quickly as possible.
What should you do?
You have a server that runs Windows Server and contains a shared folder named UserData.
You need to limit the amount of storage space that each user can consume in UserData.
What should you use?
HOTSPOT
You have on-premises servers that run Windows Server as shown in the following table.
You have an Azure file share named share1 that stores two files named File2.docx and File3.docx.
You create an Azure File Sync sync group that includes the following endpoints:
✑ share
✑ D:\Folder1 on Server1
✑ D:\Datal on Server2
For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.
HOTSPOT
You need to sync files from an on premises server named Server1 to Azure by using Azure File Sync.
You have a cloud tiering policy that is configured for 30 percent free space and 70 days.
Volume E on Server1 is 500 GB.
A year ago, you configured E:\Data on Server1 to sync by using Azure File Sync.
The files that are visible in E:\Data are shown in the following table.
Volume E does NOT contain any other files.
Where are File1 and File3 located? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
HOTSPOT
You have on-premises file servers that run Windows Server as shown in the following table.
You have the Azure file shares shown in the following table.
You add a Storage Sync Service named Sync1 and an Azure File Sync sync group named Group1.
Group1 uses share1 as a cloud endpoint.
You register Server1 and Server2 with Sync1. You add D:\Folder1 from Server1 as a server endpoint in Group1.
For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are planning the deployment of DNS to a new network.
You have three internal DNS servers as shown in the following table.
The contoso.local zone contains zone delegations for east.contoso.local and west.contoso.local. All the DNS servers use root hints.
You need to ensure that all the DNS servers can resolve the names of all the internal namespaces and internet hosts.
Solution: On Server2, you create a conditional forwarder for contoso.local and west.contoso.local. On Server3, you create a conditional forwarder for contoso.local and east.contoso.local.
Does this meet the goal?
정답:
Question No : 7
Your network contains an Active Directory Domain Services (AD DS) domain named contoso.com. The domain contains a DNS server named Server1. Server1 hosts a DNS zone named fabrikam.com that was signed by DNSSEC.
You need to ensure that all the member servers in the domain perform DNSSEC validation for the fabrikam.com namespace.
What should you do?
정답:
Question No : 8
You have servers that have the DNS Server role installed.
The servers are configured as shown in the following table.
All the client computers in the New York office use Server2 as the DNS server.
You need to configure name resolution in the New York office to meet the following requirements:
✑ Ensure that the client computers in New York can resolve names from contoso.com.
✑ Ensure that Server2 forwards all DNS queries for internet hosts to 131. 107.100.200.
The solution must NOT require modifications to Server1.
Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.
정답: Explanation:
A conditional forwarder is required for contoso.com.
A forwarder is required for all other domains.
When you have a conditional forwarder and a forwarder configured, the conditional forwarder will be used for the specified domain.
You could use a secondary zone for contoso.com but that would require a configuration change on Server1.
Question No : 9
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are planning the deployment of DNS to a new network.
You have three internal DNS servers as shown in the following table.
The contoso.local zone contains zone delegations for east.conloso.local and west.contoso.local. All the DNS servers use root hints.
You need to ensure that all the DNS servers can resolve the names of all the internal namespaces and internet hosts.
Solution: On Server2 and Server3, you configure a conditional forwarder for contoso.local.
Does this meet the goal?
You have an on-premises network that is connected to an Azure virtual network by using a Site-to-Site VPN. Each network contains a subnet that has the same IP address space. The on-premises subnet contains a virtual machine.
You plan to migrate the virtual machine to the Azure subnet.
You need to migrate the on premises virtual machine to Azure without modifying the IP address. The solution must minim administrative effort.
What should you implement before you perform the migration?
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are planning the deployment of DNS to a new network.
You have three internal DNS servers as shown in the following table.
The contoso.local zone contains zone delegations for east.contoso.local and west.contoso.local. All the DNS servers use root hints.
You need to ensure that all the DNS servers can resolve the names of all the internal namespaces and internet hosts.
Solution: You configure Server2 and Server3 to forward DNS requests to 10.0.1.10.
Does this meet the goal?
정답:
Question No : 12
DRAG DROP
You have a server named Server1 that runs Windows Server and has the Hyper V server role installed. Server1 hosts a virtual machine named VM1.
Server1 has an NVMe storage device. The device is currently assigned to VM1 by using Discrete Device Assignment.
You need to make the device available to Server1.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
HOTSPOT
You have a Windows Server container host named Server1 that has a single disk.
On Server1, you plan to start the containers shown in the following table.
Which isolation mode can you use for each container? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
You have an Azure virtual machine named VM1 that runs Windows Server and has the following configurations:
✑ Size: D2s_v4
✑ Operating system disk: 127-GiB standard SSD
✑ Data disk 128-GiB standard SSD
✑ Virtual machine generation: Gen 2
You plan to perform the following changes to VM1:
✑ Change the virtual machine size to D4s_v4.
✑ Detach the data disk.
✑ Add a new standard SSD.
Which changes require downtime for VM1?
정답: Explanation:
Data disks can be added and detached without requiring downtime. Changing the VM size requires the VM to be restarted.
Question No : 15
You have an Azure virtual machine named VM1 that runs Windows Server.
You have an Azure subscription that has Microsoft Defender for Cloud enabled.
You need to ensure that you can use the Azure Policy guest configuration feature to manage VM1.
What should you do?
