DEA-5TT1 시험 - DELL EMC실제시험문제와 답 - 61문항

Question No : 1

DRAG DROP
What is the correct sequence of steps that occur in the communications between the client and server to obtain an IP address from a DHCP server?

정답:

Question No : 2

A network administrator created three VLANs on an Ethernet switch.
How many broadcast domains are created by the switch?

A.1
B.2
C.3
D.4

정답:

Question No : 3

Which BASE-T Ethernet standard specifies a CAT6 cable type?

A.2.5GBASE-T
B.5GBASE-T
C.10BASE-T
D.10GBASE-T

정답:

Question No : 4

Which IPv4 address is in the same network as the IP address 182.15.24.40/23 and assignable to a host device?

A.182.15.23.224
B.182.15.25.0
C.182.15.25.255
D.182.15.26.10

정답:

Question No : 5

Which criteria is used to define an extended MAC ACL filter?

A.Destination MAC address and Ethernet frame type
B.Ethernet frame type and frame size
C.Destination TCP port number and source MAC address
D.Source and destination MAC addresses

정답:

Question No : 6

What accurately describes the Simple Network Time Protocol (SNTP)?

A.Time synchronization algorithms are more complex and account for clock drift.
B.Client makes sudden changes in time to keep synchronized.
C.Client synchronizes among a set of distributed time servers.
D.Implemented on a Dell EMC Network OS 9 and OS 10.

정답:

Question No : 7

Which Layer 1 device can be used to enlarge the area covered by a single LAN segment?

A.Router
B.Repeater
C.Switch
D.NIC

정답:

Question No : 8

Which type of domains are connected by a Layer 2 switch?

A.Single collision domain and a single broadcast domain
B.Multiple broadcast domains and multiple collision domains
C.Multiple collision domains and a single broadcast domain
D.Single collision domain and multiple broadcast domains

정답:

Question No : 9

Which field of the 802.3 frame is used by network interface cards to synchronize their receivers?

A.Start frame delimiter
B.Preamble
C.Cyclic redundancy check
D.Frame check sequence

정답:

Question No : 10

At which layer of the OSI model is the Rapid Spanning Tree protocol used to prevent switching loops?

A.Physical
B.Network
C.Data Link
D.Transport

정답:

Question No : 11

Which port and protocol is used by NTP to communicate?

A.TCP port 123 for both the source and destination
B.TCP port 123 for the source and TCP port 80 for the destination
C.UDP port 123 for both the source and destination
D.UDP port 123 for the source and TCP port 80 for the destination

정답:

Question No : 12

What is the valid range assigned to a client during a TCP connection?

A.20 - 25
B.443 - 1000
C.1023 - 2024
D.40000 - 65535

정답:

Question No : 13

Which option is used to configure Network Address Translation (NAT) to provide one-to-one mapping between local and global addresses?

A.Outside source static
B.Overload
C.Inside source static
D.PAT

정답:

Question No : 14

Which topology is considered a best practice when stacking switches?

A.Ring
B.Cascade
C.Serial
D.Daisy-chain

정답:

Question No : 15

What are Network Address Translation (NAT) inside global addresses?

A.Addresses used by NAT router when sending frames to devices on the local network
B.Public IP addresses used by the local network to communicate with the Internet
C.Private IP addresses used by the local network
D.Pubic addresses used by other networks outside of the local network

정답:

DELL EMC DEA-5TT1 시험