D-PDD-DY-23 시험 - DELL EMC실제시험문제와 답 - 150문항

Question No : 1

What does the system setup wizard require to set up a VTL on a PowerProtect DD system?

A.DHCP
B.Gateway IP
C.HBA
D.WWPNs

정답:

Question No : 2

A PowerProtect DD with two ES40 expansion shelves was just installed. An error message is received.
What is the most likely reason?

A.The controller HBA port connects to the host port of an expansion shelf
B.The expansion port on the shelf connects downstream to the host port of the next shelf
C.The host port on the expansion shelf connects upstream to the controller
D.The expansion port on the last shelf connects back to the controller

정답:

Question No : 3

In a PowerProtect DD backup environment, what is used for writing to and reading from the backup targets in Veritas Backup Exec?

A.Storage Node
B.Master Server
C.Media Agents
D.Media Server

정답:

Question No : 4

A company has implemented many-to-one replication between PowerProtect DD appliances.
Which types of replication are supported by this topology?

A.Directory and MTree
B.MTree and Collection
C.Collection and Directory
D.Managed File and MTree

정답:

Question No : 5

A backup administrator needs to add capacity to a file system. After the installation of an ES40, they need to verify the total amount of data stored before data reduction.
Which command would be used to verify this information?

A.filesys status
B.filesys show summary
C.enclosure show summary
D.filesys show space

정답:

Question No : 6

What rule must be followed during an upgrade procedure with the FS25 expansion shelf?

A.FS25 shelf is cabled on a separate private chain
B.For high performance, the connections from a controller to FS25 shelves must be over FC cables
C.FS25 shelf must be on the same chain with DS60
D.If ES40 SAS shelves are on the same chain as an FS25, the maximum number of shelves on that chain is five

정답:

Question No : 7

What is the maximum number of supported tape drives that can be configured using PowerProtect DD with at least 60 CPU cores?

A.526
B.512
C.1080
D.Unlimited

정답:

Question No : 8

Refer to the exhibit.

To which shelf and port should SAS HBA slot 1 port B be connected?

A.Shelf 04 BH
B.Shelf 01 BH
C.Shelf 04 BE
D.Shelf 01 BE

정답:

Question No : 9

An administrator recognizes poor network performance when using CIFS shares from a PowerProtect DD system. The network link utilization is under 100%.
What is the most likely cause of this issue?

A.TCP window size too small
B.TCP timeout too small
C.TCP timeout too large
D.TCP window size too large

정답:

Question No : 10

A backup administrator is investigating the File System Log of their source DD9900. They noticed an error on the file system and quickly corrected the issue. However, 30 minutes after making the fix, the error status has not changed.
Why is the error still appearing in the File System Log?

A.System status messages are updated every 45 minutes
B.Corrected errors do not reappear in logs
C.System status messages are updated hourly
D.System status messages are only available through CLI

정답:

Question No : 11

A customer needs help deploying a shared PowerProtect DD. They ask for best practices when configuring SMT.
What network-related attributes must they configure to increase the security of each tenant unit?

A.- Tenant unit Hostname - Local Data Access IP addresses - Remote Data Access IP Addresses - Default Gateway
B.- Tenant Unit IP Addresses - Tenant Unit Firewall Ports - Remote Data Access IP - Addresses Default Gateway
C.- Local Data Access IP addresses - Remote Data Access IP Addresses - Default Gateway - Tenant Unit Firewall Ports
D.- Remote Data Access IP - Addresses Default Gateway - Tenant Unit Virtual Interfaces - Tenant Unit Hostname

정답:

Question No : 12

Which command displays the RAID group information for the active tier of each shelf?

A.raid show info
B.storage show all
C.filesys show info
D.raid show all

정답:

Question No : 13

An administrator notices that several disks on a shelf show as unknown.
What should be done to resolve this issue?

A.Enter the disk unfail command for the unknown disks
B.Enter the storage add enclosure command
C.Ensure the expansion shelf is cabled properly
D.Cycle the power on the newly added expansion shelf

정답:

Question No : 14

An engineer is attempting to add an ES40 shelf to a PowerProtect DD9400. The system currently has one DS60 and four ES40 shelves on the same chain. The system does not recognize the additional shelf.
Why has this occurred?

A.The maximum number of shelves on the chain is exceeded
B.An active tier license must be added for additional storage
C.ES40 and DS60 shelves must be placed on separate chains
D.The system capacity license is insufficient

정답:

Question No : 15

What action needs to be taken to create the iDRAC users on the Compliance Retention Lock PowerProtect DD?

A.user create idrac [username]
B.Use the iDRAC GUI
C.user add [username] role idrac
D.user idrac create

정답:

DELL EMC D-PDD-DY-23 시험