D-CLS-DY-A-00 시험 - DELL EMC실제시험문제와 답 - 40문항

Question No : 1

Scenario: (Continued from Question 2) Assuming the domain join eventually succeeds after troubleshooting, the SCCM Task Sequence proceeds to install several corporate applications. The End User notices the laptop reboots multiple times during this phase. After the final reboot, the Windows login screen appears.
What typically happens to the stand-alone media content and temporary files used during the Boot-in-Factory (BIF) process once the Task Sequence successfully completes the Post-Delivery phase?

A.They remain on a hidden partition for future recovery needs.
B.They are automatically deleted by the CFI Cleanup task near the end of the sequence.
C.They are uploaded to a central SCCM server for logging purposes.
D.They need to be manually removed by the End User via Disk Cleanup.

정답:

Question No : 2

Scenario: (Continued from Question 1) The End User connects their laptop to their home WiFi network successfully and clicks "OK" on the network warning prompt. The SCCM Task Sequence resumes. A short while later, a progress bar appears indicating domain join is in progress, but it eventually fails with an error message indicating the domain controller could not be contacted. The user confirms they have internet access.
What common prerequisite for domain join, often handled by a specific task sequence step before the "Join Domain or Workgroup" step in the Post-Delivery phase of a BIF sequence, might be missing or have failed?

A.Applying the OS Image.
B.Installing the SCCM Client.
C.The Ping Delay task.
D.The CFI Cleanup task.

정답:

Question No : 3

Scenario: An End User receives a new Dell Latitude laptop that has been pre-imaged at the Dell factory using the company's SCCM stand-alone media process (Boot-in-Factory - BIF). The accompanying instructions state that upon first power-on at their home office, the user needs to connect the laptop to their home network (via Ethernet or WiFi) and the remaining setup steps (like domain join, final application installs) will complete automatically.
Question 1: The End User powers on the laptop. After the initial Windows Out-of-Box Experience (OOBE) screens (language, keyboard layout), they are presented with a custom message box generated by the SCCM Task Sequence stating: "Network Connection Required. Please connect an Ethernet cable or configure your WiFi connection now, then click OK to continue the corporate setup process."
Which component or script, specifically added for the Dell BIF process, is most likely responsible for displaying this custom prompt during the Post-Delivery phase?

A.The standard Windows OOBE process.
B.The cfi_launch.exe utility executed during the CS Handoff phase.
C.A custom PowerShell script like networkwarning.ps1 placed early in the Post-Delivery group of the Task Sequence.
D.The SCCM client installation step (Setup Windows and ConfigMgr).

정답:

Question No : 4

A Deployment Technician is verifying a shipment of 10 Dell laptops against a work order. They find 9 laptops match perfectly (Model, Service Tag, Condition OK). The 10th laptop has the correct Model and Service Tag, but during the condition check, the technician discovers the chassis is cracked near the hinge.
Work Order Summary:
---------------------------------------------
Item Count: 10 x Latitude 7430
Service Tags: [List including SVCTAGXYZ09, SVCTAGXYZ10]
Special Instructions: Inspect all units upon arrival. Report discrepancies immediately.
---------------------------------------------
Inspection Log Entry:
---------------------------------------------
Unit 1-9: Match WO, Condition OK.
Unit 10 (SVCTAGXYZ10): Matches WO Model/STag. Physical Damage: Cracked chassis near left hinge.
---------------------------------------------
According to standard deployment procedures for handling discrepancies and damaged goods, what are the essential next steps the technician MUST take regarding the 10th laptop (SVCTAGXYZ10)? (Select all that apply.)

A.Attempt to repair the cracked chassis using epoxy before deployment.
B.Proceed with OS imaging and software deployment for the damaged laptop.
C.Clearly label the damaged laptop (SVCTAGXYZ10) and physically separate it from the functional units.
D.Update the electronic work order or deployment ticket with detailed notes about the damage found for SVCTAGXYZ10.
E.Immediately contact the supervisor or designated point of contact to report the damage and await further instructions.
F.Swap the hard drive from the damaged laptop into a spare chassis if available.

정답:

Question No : 5

A Deployment Technician powers on a new Dell laptop briefly as part of the condition check process specifically to inspect the screen.
Which of the following screen issues observed during this brief check should be considered significant defects requiring the laptop to be reported as damaged? (Select all that apply.)

A.A single stuck pixel displaying a constant color (e.g., red or green).
B.A visible crack spreading across the screen surface.
C.Fingerprint smudges on the screen.
D.A cluster of 5 or more dead (black) or stuck pixels in close proximity.
E.Uneven backlight illumination (backlight bleed) visible primarily at the screen edges on a black background.
F.The default Windows background image is displayed.

정답:

Question No : 6

During the physical check of a new Dell Latitude laptop, the Deployment Technician carefully examines the various ports.
Which type of port damage would most likely prevent a critical function (like charging or external display) and require the device to be flagged as damaged?

A.Minor scratches on the plastic housing around a USB-A port.
B.A piece of dust or lint inside an RJ45 Ethernet port.
C.A bent or broken pin inside the USB-C/Thunderbolt port used for charging and docking.
D.Discoloration on the metal shield of an HDMI port.

정답:

Question No : 7

While inspecting a new Dell OptiPlex desktop chassis after unboxing, a Deployment Technician observes the following:
Observation Notes:
--------------------------------------------------
- Minor scuff mark (approx. 1 cm) on the top plastic panel, does not penetrate paint.
- Front USB port metal shield appears slightly bent inward on one side, but a USB device still inserts.
- Side panel has a noticeable dent (approx. 3 cm diameter, 0.5 cm deep) near the rear corner.
- Power button feels slightly loose but functions when pressed.
--------------------------------------------------
Which of these observations most strongly indicates potential functional impact or significant damage that MUST be reported and likely prevent immediate deployment? (Choose 1.)

A.Minor scuff mark on top panel
B.Slightly bent front USB port shield
C.Noticeable dent on side panel near rear corner
D.Slightly loose power button

정답:

Question No : 8

A Deployment Technician receives a pallet of Dell laptops. While inspecting the unopened boxes, they notice one box has a significantly crushed corner and a visible tear.
What should the technician's immediate action be regarding this specific box ?

A.Open the box immediately and power on the laptop inside to check functionality.
B.Set the box aside, clearly mark it as potentially damaged, and continue inspecting other boxes.
C.Ignore the box damage as internal packaging usually protects the device.
D.Return the entire pallet to the sender without opening any boxes.

정답:

Question No : 9

What is the primary purpose of performing a physical condition check on new Dell equipment immediately upon arrival, before starting any deployment procedures?

A.To install the latest firmware updates.
B.To verify the operating system license activation.
C.To identify and document any potential shipping damage or manufacturing defects.
D.To configure the initial network settings.

정답:

Question No : 10

Scenario: (Continued from Question 3) The IT Administrator needs to establish a clear procedure for Field Technicians to follow when verifying equipment. Besides matching Service Tags and basic components (RAM, SSD Size often visible in BIOS), the work orders sometimes specify custom configurations applied via Dell Configuration Services (e.g., specific BIOS settings, asset tagging).
How should the IT Administrator advise Field Technicians to verify these custom configuration service items listed on the work order?

A.Assume Dell Configuration Services applied them correctly and skip verification.
B.Boot the laptop into the pre-installed OS and run Dell Command | Update.
C.Boot the laptop into the BIOS/UEFI setup and manually navigate to check each specified setting (e.g., Asset Tag field, specific security settings).
D.Connect the laptop to SCCM and run a hardware inventory cycle.

정답:

Question No : 11

Scenario: (Continued from Question 2) A Field Technician at a branch office reports a discrepancy: a Dell laptop's physical Service Tag matches the work order, but the RAM configuration reported in the BIOS (8GB) differs from the work order specification (16GB).
What are the appropriate immediate actions for the Field Technician according to standard verification procedures? (Select all that apply.)

A.Proceed with imaging the laptop but flag it for later RAM upgrade.
B.Document the discrepancy clearly, noting the Service Tag and the specific difference (RAM amount).
C.Halt the deployment process for this specific laptop.
D.Attempt to upgrade the RAM immediately using spare parts available locally.
E.Report the discrepancy to the IT Administrator or designated point of contact managing the hardware refresh.
F.Check the shipping box label for the configuration details.

정답:

Question No : 12

Scenario: (Continued from Question 1) The IT Administrator wants to provide Field Technicians with a quick, automated way to verify the Service Tag on a Dell laptop without needing to boot the OS or physically search for the label (which might be worn or inaccessible).
Which method allows retrieval of the Service Tag from a Dell laptop before the operating system boots or without relying on the physical label?

A.Scanning the barcode on the shipping box.
B.Accessing the BIOS/UEFI setup screen.
C.Using Dell Migrate's pre-check function.
D.Checking the Dell Command | Update history log.

정답:

Question No : 13

Scenario: An IT Administrator is managing a large-scale hardware refresh project involving several hundred Dell laptops ordered through Dell Configuration Services. The laptops are shipped directly to various branch offices. The administrator needs to ensure that the Field Technicians at each site correctly verify the received equipment against the centrally managed electronic work orders before proceeding with deployment. The work orders contain specific Service Tags and configuration details.
Question 1: To facilitate accurate verification by Field Technicians, which piece of information uniquely and reliably identifies a specific Dell laptop unit and MUST be cross-referenced between the physical device and the electronic work order?

A.Model Number (e.g., Latitude 7430)
B.Order Number
C.Service Tag
D.Operating System Version pre-installed

정답:

Question No : 14

Mention basic cable management techniques suitable for an office environment.
Evaluation Criteria:
・ Correctly identifies all required cables/connections.
・ Sequences connections logically, typically starting with peripherals to the dock before connecting the dock to the laptop and power.
・ Specifies the correct port types (e.g., DisplayPort on dock and monitor, USB-C/Thunderbolt for laptop connection, RJ45 for network).
・ Includes connecting the dock's power adapter as a distinct step.
・ Mentions practical cable management (e.g., using Velcro straps, routing cables).

정답:

Question No : 15

Provide the PowerShell command to execute `cctk.exe` with the correct argument(s) to *verify* the current status of the Wake-On-LAN setting.
*(Note: Focus on invoking the cctk executable from within PowerShell.)*
Evaluation Criteria:
- Correctly identifies the `cctk.exe` argument for Wake-On-LAN (`--wakeonlan`).
- Correctly identifies the value required to enable WOL (`enable` or `enablewithpxe`).
- Provides a syntactically correct PowerShell command to execute `cctk.exe` with the enabling argument (e.g., using `&` call operator or `Start-Process`).
- Provides a syntactically correct PowerShell command to execute `cctk.exe` with the argument to read the current WOL setting.
- Assumes standard execution; complex error handling is not required for this lab.

정답: # Assume cctk.exe is in the PATH or provide full path e.g., $cctkPath = "C:\Dell\DCC\cctk.exe"
$cctkPath = "cctk.exe" # Or "C:\Program Files (x86)\Dell\Command Configure\X86_64\cctk.exe" or similar default path
# 1. Enable Wake-On-LAN (using 'enable', common option)
& $cctkPath --wakeonlan=enable
# OR use enablewithpxe if that's the desired specific state:
# & $cctkPath --wakeonlan=enablewithpxe
# Wait briefly for setting to potentially apply if needed (optional)
# Start-Sleep -Seconds 2
# 2. Verify the Wake-On-LAN setting
& $cctkPath --wakeonlan

DELL EMC D-CLS-DY-A-00 시험