C9530-001 시험 - IBM실제시험문제와 답 - 122문항

Question No : 1

A developer is migrating SOA based applications to IBM Integration Bus Toolkit. There are existing WSDL files that are available to the developer.
Which solution type should the developer select?

A.Application
B.Integration Project
C.Integration Service
D.Pattern Authoring Project

정답:
Explanation:
You can define a service interface and implement its operations to create an integration service based on WSDL in IBM Integration Bus.
Note: To create an integration service based on existing WSDL, complete the following steps:

Question No : 2

Which node supports the propagation of an LTPA v2 token in IBM Integration Bus?

A.MQOutput
B.HTTPRequest
C.SCAAsyncRequest
D.SOAPAsyncRequest

정답:
Explanation:
LTPA v2 tokens are supported for propagation by the following nodes:
SOAPRequest
SOAPAsyncRequest
References: https://www.ibm.com/support/knowledgecenter/en/SSMKHH_9.0.0/com.ibm.etools.mft.doc/ ap04050_.htm

Question No : 3

Which type of container can allow for runtime isolation, ensuring that updates to one group of deployed resources do not affect another group?

A.Application
B.MessageSet
C.Shared Library
D.Dynamic Library

정답:
Explanation:
Applications provide runtime isolation whereby resources inside the application are not visible to other resources, such as message flows, libraries, or other applications that are running outside the application. Consider using applications if you need to ensure that updates to one group of deployed resources do not affect another group. For example, use an application when you want to control which flows pick up the latest version of an ESQL module.
References: https://www.ibm.com/support/knowledgecenter/en/SSMKHH_9.0.0/com.ibm.etools.mft.doc/ bc23060_.htm

Question No : 4

In what format does the Flow Exercise save the message processed through the integration flow?

A.XML
B.BLOB
C.Same format as the input message
D.Gives user a choice to save it in user-preferred format

정답:

Question No : 5

How should a Developer move an IBM Integration Bus installation and its components to another physical location?

A.Uninstall and reinstall in the required location.
B.Copy and paste the associated files to required location.
C.Use the mqsimigratecomponentscommand.
D.Use the mqsibackupbrokerand mqsirestorebrokercommand.

정답:
Explanation:
The mqsirestorebroker command restores the broker configuration from a backup file that you have created by using the mqsibackupbroker command. You can restore a broker only on a computer that has an identical configuration; the operating system must be at the same level, and the broker and queue manager names must be identical.
References: https://www.ibm.com/support/knowledgecenter/en/SSMKHH_9.0.0/com.ibm.etools.mft.doc/ bn43000_.htm

Question No : 6

An IBM Integration Bus Administrator has configured the configurable services DataCaptureStore, DataCaptureSource and DataDestination and ensured the WebUI users are setup correctly.
However, when running messages through the Integration flow, nothing gets recorded into the database.
What could be the missing step in the configuration of the message flow?

A.The Integration flow was not started.
B.The Integration flow was not deployed.
C.The monitoring events were not created/enabled.
D.The recording was not enabled using the command mqsichangeflowrecording.

정답:

Question No : 7

Which of the following statement regarding the SAPInput Node is true?

A.DFDL domain can be used to model ALE configuration and IDocs.
B.The SAPInput Node must always be paired with the SAPReply Node in the same message flow.
C.When the processing in the message flow is done, the SAPReply Node opens a new connection to the SAP program and send the response back to SA
D.When a listener receives a call from SAP in synchronous mode, it blocks processing until the message can be picked up by an available message flow instance that contains the SAPInput Node.

정답:
Explanation:
You can improve performance by configuring the number of listeners on the adapter and the number of additional instances on the message flow to prevent delays when processing synchronous calls from SAP.
When the listener receives a call from SAP, it blocks processing until a message flow instance that contains the SAPInput node is available. When a message flow instance has become available, and has started to process the import parameters, the listener again blocks processing until a message that contains the export parameters is propagated to an SAPReply node.
Incorrect Answers:
B: You can use a SAPReply node in the same message flow as an SAPInput node, or in a different flow from an SAPInput node. The SAPReply node must be deployed in the same integration server as the SAPInput node.
References: https://www.ibm.com/support/knowledgecenter/en/SSMKHH_9.0.0/com.ibm.etools.mft.doc/ bc22040_.htm

Question No : 8

Which terminal is wired to check for any exceptions within the node?

A.In Terminal
B.Error Terminal
C.Throw Terminal
D.Failure Terminal

정답:
Explanation:
The Failure Terminal is the output terminal to which the input message is routed if an unhandled exception occurs during the computation.
When a message flow node that has a Failure terminal detects an internal error, it propagates the message to that terminal. If it does not have a Failure terminal, or the Failure terminal is not connected, the integration node generates an exception.
References:
https://www.ibm.com/support/knowledgecenter/en/SSMKHH_10.0.0/com.ibm.etools.mft.doc/ac00412_.htm

Question No : 9

Which destination can a trace node output not to be written to?

A.File
B.Console
C.User Trace
D.Local Error Log

정답:
Explanation:
The destination of the trace record that is written by the node.
The Destination refers to the computer that hosts the broker on which the Trace node is deployed:
- To write the trace record to a file of your choice, select File.
- To write the trace record to the system-generated user trace log, select User Trace.
- To write the trace record to the local system error log, select Local Error Log.
References: https://www.ibm.com/support/knowledgecenter/en/SSMKHH_9.0.0/com.ibm.etools.mft.doc/ ac04840_.htm

Question No : 10

A flow started from an MQInput Node has multiple database interactions from Compute, Java Compute and Map Nodes. All relevant node transactional properties are set to automatic. XA is not configured. Where are the transactions committed in the flow?

A.Both databases and the MQ transactions are committed at the end of the flow.
B.MQ transactions are committed at the end of the flow but each database interaction is committed as the message is propagated from the Out terminal.
C.Since there is only one MQ Node the MQ transaction is committed while propagating from the Out terminal of the MQInput Node and all the database interactions are committed at the end of the flow.
D.Each of the nodes mentioned has a Transaction property to determine the transactional nature of the node and is always committed when propagating from the Out terminal independent of any other Nodes in the flow.

정답:
Explanation:
References: https://www.ibm.com/support/knowledgecenter/en/SSMKHH_10.0.0/com.ibm.etools.mft.doc/
ac00390_.htm

Question No : 11

Which statement about the DFDL parser and domain is true?

A.The DFDL parser is not an on-demand parser.
B.DFDL domain is not intended for general text and binary message formats.
C.DFDL domain is intended for parsing and writing XML or JSON formatted messages.
D.The DFDL parser interprets a bit stream by using grammar defined in a DFDL schema file.

정답:
Explanation:
The DFDL parser is model-driven.
Incorrect Answers:
B: IBM Integration Bus provides support for a DFDL domain. The DFDL domain can be used to parse and write a wide variety of message formats, and is intended for general text and binary message formats, including industry standards.
References: https://www.ibm.com/support/knowledgecenter/en/SSMKHH_9.0.0/com.ibm.etools.mft.doc/ bc40130_.htm

Question No : 12

Which is true regarding MQ topology options for IBM Integration Bus?

A.Only local bindings to MQ Queue Managers are supported for the MQInput node.
B.MQ is an optional component that is not required unless using MQ transport nodes.
C.There is a one to one relationship required between MQ Queue Manager and Integration Node.
D.MQ can be used to create flexible connection topologies.

정답:
Explanation:
You can use WebSphere MQ to create flexible connection topologies from the different connectivity options.
References: https://www.ibm.com/support/knowledgecenter/en/SSMKHH_10.0.0/com.ibm.etools.mft.doc/ ac25961_.htm

Question No : 13

What is one to set the flow debugger port?

A.Use the mqsichangebroker command to set the debug port.
B.Use the mqsichangedebugport command to set the debug port.
C.In the IBM Integration Bus Toolkit set the debug port in the Preferences.
D.In the IBM Integration Bus Toolkit right-click on the Integration Server and set the debug port.

정답:
Explanation:
Before you can debug a message flow, you must configure and enable the flow debug port. The flow debug port is also known as the Java debug port, and the JVM debug port.
Use the IBM Integration Explorer, or IBM Integration Toolkit to set the flow debug port value to enable the flow debugger to be connected to an integration server.
Note:
Using the IBM Integration Toolkit

Question No : 14

Two different sets of applications are deployed to Integration Server 1 and Integration Server 2 respectively, as shown in the image below.

What is the advantage of using the Integration Server embedded HTTP listener to the Integration Node listener?

A.Failover
B.Load balancing
C.Better throughput
D.Single IP address for HTTP clients to use

정답:
Explanation:
Each connector has its own assigned port, which is allocated from a range of numbers, as required. The default range for the HTTP Connector is 7800 - 7842; the default range for the HTTPS Connector is 7843 7884. The first integration server to start an embedded listener is allocated port 7800, the second is allocated 7801, and so on.
If you deploy a message flow to multiple integration servers, the port number is incremented by one for each successive deployment. Assume that no embedded listeners have as yet been started for these integration servers. In this case, the message flow that is deployed to the first integration server receives requests on port 7800. The next message flow uses port 7801, and so on, up to the specified limit of 7842. In this scenario, you typically use an intermediary router that listens on one port, then distributes the requests across the range of ports that you are using.
References: https://www.ibm.com/support/knowledgecenter/en/SSMKHH_10.0.0/com.ibm.etools.mft.doc/ bc43700_.htm

Question No : 15

Which statement is true regarding IBM Integration Bus (IIB) integration with Business Process Manager (BPM)?

A.IIB can only communicate with BPM through SOAP messages.
B.A BPM integration service can be added as an operation to an existing IIB service.
C.After a BPM integration service is created, the business logic flow can be added before it is imported into II
D.A BPM integration service definition must be exported from a BPM Toolkit in order for it to be imported into II

정답:
Explanation:
Complete the following high-level steps to create a BPM integration service that interoperates with an IBM Integration Bus integration service.

IBM C9530-001 시험