CompTIA 220-1101 시험

Question No : 1

A technician needs to fix a Cat 5 cable issue. The cable, which is connected to a network jack, fails when it is moved around.
Which of the following items must the technician use to fix the issue? (Select TWO).

• A.Scissors
• B.Network tap
• C.Magnetized screwdriver
• D.Tone generator
• E.RJ45 connector
• F.Crimper

답을 확인하기

정답:

Question No : 2

A user submitted a ticket to report an issue with a new printer that is no longer accepting new print jobs.
The technician verifies the printer is on and notices the printer LCD screen has the following error message:
Paper Jam, Jam in fuser.
Which of the following is the MOST efficient next step the technician should complete?

• A.Apply a maintenance kit to the printer
• B.Check the printer paper path to locate any obstructions.
• C.Turn the printer on and off to see if the error clears.
• D.Replace the fuser.

답을 확인하기

정답:

Question No : 3

An engineer is experiencing unexpected reboots on a graphics workstation when rendering complex 3-D models. The workstation is configured with a 115V power supply that is rated at 200W and connected to a UPS. The central processing unit contains 16 hyperthreaded cores, and a discrete graphics solution utilizing an 8-pin power connector is installed in a PCI Express x16 slot.
Which of the following indicates where the technician should begin troubleshooting?

• A.The UPS, as 115V is insufficient for the configuration and should be increased to 220V
• B.The power supply, as 200W is insufficient when the GPU is heavily tasked
• C.The graphics card, as it is the component that triggers the unexpected reboots
• D.The motherboard, as only standard PCI slots should be used for high-end graphics cards, not PCI Express slots

답을 확인하기

정답:

Question No : 4

A user acquired a new workstation and is attempting to open multiple targe Excel files simultaneously. The user is not experiencing the expected performance when executing such large requests.
Which of the following should a technician do FIRST?

• A.Increase the swap partition.
• B.Upgrade the CPU in the workstation.
• C.Upgrade the power supply in the workstation.
• D.Upgrade the RAM in the workstation.

답을 확인하기

정답:

Question No : 5

A technician installed a Cat 5 UTP cable approximately 275ft (84m) from a network switch in an office to a workstation located on a factory floor. The technician sees both a flashing green LED and a flashing orange LED on the workstation's NIC.
Which of the following should the technician do FIRST?

• A.Check for loose connections, pinched bends, and physical damage.
• B.Install a powered hub as close as possible to the halfway point in the Cat 5 UTP cable run.
• C.Replace the entire run of Cat 5 UTP cable with Cat 5 STP cable.
• D.Upgrade the entire cable run to multimode fiber.

답을 확인하기

정답:

Question No : 6

A Microsoft Windows user is preparing to work in another country and needs to comply with corporate policy for data protection when copying files to portable media.
Which of the following solutions would MOST likely satisfy this requirement?

• A.A USB 3.1 flash drive with BitLocker to Go installed
• B.An SD memory card with NTFS
• C.An xD memory card with ext3
• D.A portable hard drive with FAT32

답을 확인하기

정답:

Question No : 7

A technician replaced a motherboard on a server, and now the 64-bit hypervisor is not loading correctly.
Which of the following needs to be enabled for the hypervisor to run?

• A.Hardware prefetcher
• B.Hyperthreading
• C.vPro
• D.VT-d

답을 확인하기

정답:

Question No : 8

An organization has some computers running macOS and some computers running Windows. The computers running macOS also need to run a piece of software that is only available on Windows.
Which of the following BEST describes the solution for running Windows software on a computer running macOS?

• A.Operating system spoofing
• B.Remote software provisioning
• C.Indirect software implementation
• D.Cross-platform virtualization

답을 확인하기

정답:

Question No : 9

A technician is setting up a new desktop computer and will be installing the hard drive directly on the motherboard without using cables to connect it.
Which of the following will the technician be installing?

• A.Thunderbolt
• B.eSATA
• C.2
• D.SCSI

답을 확인하기

정답:

Question No : 10

Several users who share a multifunction printer in an office have reported unintended, thin, vertical lines that cover the entire height of every page printed from the printer.
Which of the following steps should a technician complete in order to MOST likely resolve this issue?

• A.Replace the printer paper with a new ream.
• B.Clear the print spooler on each computer.
• C.Reinstall the printer driver on each computer
• D.Perform the drum-cleaning procedure.

답을 확인하기

정답:

Question No : 11

A technician is configuring a workstation to be used as a VM host. After installing the necessary software, the technician is unable to create any VMs.
Which of the following actions should be performed?

• A.Disable the BIOS password.
• B.Enable TP
• C.Enable multithreading.
• D.Enable Fast Startup.

답을 확인하기

정답:

Question No : 12

A user reports that printed receipts have black smudges over the entire image. The text is still present but is very dark and sometimes illegible.
Which of the following are the MOST likely cause and solution for the printer issue?

• A.The ribbon is jammed and is rubbing on the paper. Clear the bad ribbon and feed it through properly.
• B.The printhead is too hot. Adjust the temperature down and retry printing.
• C.The printer is loaded with the wrong type of paper. Replace the receipt paper with carbon paper.
• D.The blue ink cartridge was loaded with black ink. Put in the correct ink and clean the printhead.

답을 확인하기

정답:

Question No : 13

A user connects a smartphone to a laptop.
Which of the following types of networks has the user created?

• A.PAN
• B.MAN
• C.WLAN
• D.LAN

답을 확인하기

정답:

Question No : 14

While implementing a non-carrier-grade wireless backhaul, a technician notices the current channel selection is extremely polluted with various RF signals. Upon performing a spectral analysis, the technician discovers a channel containing almost no RF pollution. Unfortunately, the technician is unable to select that channel.
Which of the following is the MOST likely reason for this issue?

• A.The channel is reserved for licensed band use.
• B.The channel selection is defective; contact the manufacturer.
• C.The channel must be unlocked by the vendor.
• D.The device requires a firmware update to unlock the channel.

답을 확인하기

정답:

Question No : 15

A technician needs to recommend an internet connection for a customer who travels around the world and wants to have connectivity while visiting remote camping locations. Some of the locations the customer visits have limited or unreliable cellular service.
Which of the following connection types should the technician recommend?

• A.Satellite
• B.DSL
• C.Fiber
• D.Hotspot

답을 확인하기

정답: